Large Format

Product Options

  • Description
  • Recommendation
  • Marketing Tips

Description

Yard Signs are printed in full color on rigid 4mm and 6mm corrugated plastic and are available in sizes ranging from 12" x 12" to 48" x 46". With printing on either one or both sides, Yard Signs can be oriented in landscape or portrait.

6mm: Produced and Shipped from New Jersey

Utilize the vertical flutes (almost always a landscape orientation) to allow H-Wire and Beefy Stakes to be inserted into the bottom of the sign. Yard Signs can also be ordered with Grommets, Contour cutting, Pole Wire w/ Zip Tie and more combinations. To order additional stakes. Select Yard Signs with Stakes from the "Large Format" dropdown menu.

Note: Because of the wide potential size range of our large format products, there are additional file setup considerations. For details, please review the file setup section carefully.

Recommendation

The most common order options are 24" x 18" on 4mm White Corrugated Plastic. Almost always, Yard Signs are printed in full color on both sides (4/4) and are supported by H-Wire stakes.

To order additional Yard Sign Stakes, please check out our Yard Sign Stakes under Large Format.

  • Custom Sizes

Custom Sizes

Available in custom sizes ranging from 12"x 12" up to 48" high x 46" wide.

  • 4mm White Corrugated Plastic
  • 6mm White Corrugated Plastic

4mm White Corrugated Plastic

Strong perpendicular to the flutes and designed to withstand the elements or for indoor use, 4mm White Corrugated Plastic is durable and lightweight. The channels between the flutes accommodate yard sign stakes perfectly and the bright white finish showcases colors and designs. It can be printed on both sides.

  • 4/4 (Full Color Both Sides)
  • 4/0 (Full Color Front Side Only)

4/4

Full color on both sides of the sheet. This option can reproduce the range of colors you see in a typical photograph out of the standard 4 printing colors: cyan, magenta, yellow, and black. Typical examples of this are magazine covers and high-end catalogs.

  • Lamination
  • Explanation of Turnaround Time
  • Next Day
  • Rush 1-2 day
  • 2-3 Days

Explanation of Turnaround Time

See a quick chart showing turnaround times

Turnaround times begin when the proof is approved. All times are based on standard business days Monday through Friday excluding federal holidays. For orders shipping to the West, please use the Pacific time zone (California). For orders shipping to the Midwest and East, please use the Eastern time zone (New York). Please see the below map.

Please note that turnaround time does not include shipping or mailing time. You may select from available production turnaround times and your preferred shipping time as you place your order.

Our products are the same great quality for every turnaround time we offer.

  • Grommets
  • Contour Cut
  • Pole Wire w/Zip Tie
  • H-Wire Stakes
  • Beefy Stakes
  • Spider Step Stake

Grommets

Grommets are round, metal hole reinforcements. They are a convenient addition to use for mounting your printed piece. Grommets are available in 2 or 4 corners or placed every two feet for larger printed pieces.

Contour Cut

Contour Cut creates a custom shape. It is recommended to keep Contour Cut designs simple like arrows, stars, or other basic objects for accurate, clean edges.

Die lines must be included in files uploaded for Contour Cut.

Final Contour Cut size must be 1" smaller than the sheet order size. For example 48" x 24" sheet order size, the Contour Cut must be 47" x 23" maximum size.

Pole Wire w/Zip Tie

Pole Wires are 18" wide by 8" tall and are constructed from 9 gauge galvanized steel. They are designed to attach to poles by using plastic ties, so they can sit at a variety of heights depending on desired use and location. They will hold a sign stable, though they are recommended for short term use.

H-Wire Stakes

H-Wire Stakes are 10" wide by 30" high (for a sign that sits 14" above the ground when Stakes are fully inserted) and constructed from 9 gauge galvanized steel. They will hold a sign stable, though they are recommended for one-time use. The bottom rung of the H-Wire increases stability and may also be used to assist when inserting the stake into the ground.

Beefy Stakes

Beefy Stakes are made from a titanium byproduct, so they are sturdier than H-Wire Stakes. Two beefy stakes are necessary to support a sign, though signs wider than 24" will likely require 3 stakes, while signs wider than 36" may require 4.

Spider Step Stake

Spider Step Stake has a fresh appearance and it penetrates the ground much easier. Its molded from 100% re-processed glass reinforced plastic and allows for easy maneuvering with a lawn mower. The prongs are 5" tall and 7.5" apart for easy installation of your sign.

  • Large Format Quantity

Large Format Quantity

To see available quantities, click on the "Quantity" dropdown menu in the pricing calculator.

To request a custom estimate, click "Estimates" at the top of the page.

  • Get Templates
  • Create Your Own Templates
  • File Preparation
  • File Orientation
  • Bleed and Safe Area
  • Proofs and File Check

Please Select Template Below:


PDF stands for Portable Document Format. This template can be imported into: InDesign, Quark Express, Illustrator, Corel Draw, and many other content creation programs.

JPEG stands for Joint Photographic Experts Group and is a basic raster file format. This template is recommended for Photoshop.

EPS stands for Encapsulated PostScript. This template is recommended for advanced Illustrator users only.

Pricing Calculator

This is an example of the back of the envelope with flap.
Close this window and click the button to download a template.

California Office: 5700 Bandini Blvd., Commerce, CA 90040  •  Kentucky Office: 4015 Produce Road, Louisville, KY 40218  •  New Jersey Office: 551 Mid Atlantic Pkwy, West Deptford, NJ 08066